Parameter name Default
value
Description
DISCOVER_AVAYA_ENVIRONMENT 1 Specifies dynamic feature set
discovery
Value operation:
• 1: The phone discovers and
verifies if the controller supports
the AST feature set or not. The
phone sends a SUBSCRIBE
request to the active controller for
the Feature Status Event Package
(avaya-cm-feature-status). If the
request succeeds, the phone
proceeds with PPM
Synchronization. If the request is
rejected, or is proxied back to the
phone, or does not receive a
response, the phone assumes that
AST features are not available.
• 0: The phone operates in a mode
where AST features are not
available.
Note:
Set the parameter to 0 for IP
Office environment.
DISPLAY_SSL_VERSION 0 Specifies whether OpenSSL and
OpenSSH versions are displayed in
the Administration menu.
Value operation:
• 0: OpenSSL and OpenSSH
versions are not displayed.
• 1: OpenSSL and OpenSSH
versions are displayed.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 179
Comments on this document? infodev@avaya.com
To Next Page
Loading...
