Avaya 9600 Series - Page 187

Parameter name Default
value
Description
ENABLE_G711A 1 Specifies if the G.711 a-law codec is
enabled.
Value operation:
• 0: Disabled
• 1: Enabled
ENABLE_G711U 1 Specifies if the G.711 mu-law codec
is enabled.
Value operation:
• 0: Disabled
• 1: Enabled
ENABLE_G722 1 Specifies if the G.722 codec is
enabled.
Value operation:
• 0: Disabled
• 1: Enabled
ENABLE_G726 1 Specifies if the G.726 codec is
enabled.
Value operation:
• 0: Disabled
• 1: Enabled
ENABLE_G729 1 Specifies if the G.729A codec is
enabled.
Value operation:
• 0: Disabled
• 1: Enabled without Annex B
support (default).
• 2: Enabled with Annex B support.
ENABLE_MLPP 0 Specifies that whether the Multiple
Level Precedence and Preemption
(MLPP) is enabled or not.
Value operation:
• 0: Disabled.
• 1: Enabled.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 187
Comments on this document? infodev@avaya.com