Parameter name Default
value
Description
ENABLE_PHONE_LOCK 0 Specifies whether the Lock softkey
on the Idle phone screen and the
Lock feature button are enabled on
the phone. If enabled, a user can
manually lock the phone by pressing
the button or selecting the feature.
Value operation:
• 0: Disabled. Lock softkey and
feature button are not displayed.
• 1: Enabled. Lock softkey and
feature button are displayed.
Note:
On Avaya J129 IP Phone, the
Lock option is in the Main
menu. There is no Lock
softkey or feature button.
ENABLE_PPM_SOURCED_SIPPROXYSRVR
The parameter is only available in an Avaya Aura
®
environment.
1 Enables PPM as a source of SIP
proxy server information.
Value operation:
• 0: Proxy server information
received from PPM is not used.
• 1: Proxy server information
received from PPM is not used.
ENABLE_PRECEDENCE_SOFTKEY 1 Specifies that whether the
precedence soft key is enabled or
not on the idle line appearances on
Phone Screen.
Value operation:
• 0: Disabled.
• 1: Enabled.
ENABLE_PRESENCE 1 Specifies if presence will be
supported.
Value operation:
• 0: Disabled
• 1: Enabled
Note:
This parameter is set to 0 in IP
Office environment.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 189
Comments on this document? infodev@avaya.com
To Next Page
Loading...
