Parameter name Default
value
Description
GROUP 0 Specifies specifically-designated
groups of phones by using IF
statements based on the GROUP
parameter.
The value of GROUP can be set
manually in a phone by using the
GROUP local craft procedure.
The default value of GROUP in each
phone is 0, and the maximum value
is 999.
GUESTDURATION 2 Specifies the duration (in hours)
before a Guest Login or a visiting
user login is automatically logged off
if the phone is idle.
Valid values are integers from 1 to
12.
Note:
This parameter is supported by
J159 and J169/179 phones.
GUESTLOGINSTAT 0 Specifies whether the Guest Login
feature is available to users.
Value operation:
• 0: The feature is not available.
• 1: The feature is availble..
Note:
This parameter is supported by
J159 and J169/179 phones.
GUESTWARNING 5 Specifies the number of minutes,
before time specified by
GUESTDURATION, that a warning
of the automatic logoff is initially
presented to the Guest or Visiting
User.
Valid values are integers from 1 to
15.
H
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 199
Comments on this document? infodev@avaya.com
To Next Page
Loading...
