Prompt Response Description
SLl System to system.
CTYP aaa <CR> Call Type. Enter the call type to be associated with the
outgoing route for direct dialing using the trunk access
code (instead of NARS access code).
INAC YES Insert Access Code. Permits the NARS AC1 or AC2
access code to be re-inserted automatically on an
incoming ESN call.
Table 93: LD 14 - Assign a channel identifier
Prompt Response Description
REQ NEW CHG Add new data. Change existing data.
TYPE TIE TIE trunk type.
TN c u Card and unit to be associated with this trunk.
RTMB 0-127 1-510 Route number and member number.
CHID 1-240 Channel identifier for ISL channels (remove with Xnn).
Must be coordinated with far-end (no default value).
ISL maintenance
DCHI quick reference
Table 94: D-channel commands (LD 96) on page 174 provides a quick-reference list of D-
channel commands (LD 96).
Table 94: D-channel commands (LD 96)
Command Action
DIS DCHI N Disable DCHI port N.
ENL DCHI N Enable DCHI port N.
EST DCH N Establish D-channel N.
PLOG DCHI N Print D-channel statistics log N.
RLS DCH N Release D-channel N.
SDCH DCH N Release a D-channel and switch D-channels.
2.0 Mb ISL maintenance
174 ISDN Primary Rate Interface Maintenance November 2011
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
