Avaya J129 - Making a Call from Your Call Log

Name Description
WEP Key 2 Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WEP Key 3 Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WEP Key 4 Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WPA2 Enterprise (802.1x)
EAP Authentication Method Specifies the type of EAP authentication method.
The options are:
• PEAP (default)
• TLS
EAP Phase 2 Authentication Method Specifies the type of EAP Phase 2 authentication method.
The options are:
• None (default)
• MSCHAPV2
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 107
Comments on this document? infodev@avaya.com