Name Description
Phone Lock Idle Time Specifies the idle time in minutes after which the phone is
locked.
The valid value is an integer from 0 to 10080. The default value
is 0 minutes.
Other
Softkey Configuration Specifies which feature will show up on which softkey on the
phone screen.
Note:
This setting applies only to Avaya J129 IP Phone.
The following numbers are assigned to the features:
• 0 – Redial
• 1 – Contacts
• 2 – Emergency
• 3 – Recents
• 4 – Voicemail
Value format: numbers from 0 to 4 and a comma (,).
The default value is “0,1,2”.
Branding Volume Specifies the volume level at which the Avaya audio brand is
played.
The options are:
• 12db below nominal
• 9db below nominal
• 6db below nominal
• 3db below nominal
• Nominal (default)
• 3db above nominal
• 6db above nominal
• 9db above nominal
Phone Mute Alert Specifies whether the Mute Alert feature is blocked.
The options are:
• Unblocked
• Blocked (default)
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 124
Comments on this document? infodev@avaya.com
To Next Page
Loading...
