Avaya J129 - Page 227

Parameter name Default
value
Description
ASTCONFIRMATION 60 Specifies the number of seconds
that the phone waits to validate an
active subscription when it
subscribes to the avaya-cm-
feature-status package.
Valid values are 16 through 3600.
This parameter is not supported in
IP Office environment as there is no
subscription to Avaya-cm-feature-
status.
AUDASYS 3 Specifies the audible alerting
setting for the phone.
Value operation:
• 0: Turns off audible alerting. User
cannot adjust ringer volume.
• 1: Turns on audible alerting. User
can adjust ringer volume, but
cannot turn off audible alerting.
• 2: Turns off audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
• 3: Turns on audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
Note:
Avaya J129 IP Phone does not
support this parameter.
AUDIOENV 0 Specifies the audio environment
index and enables you to customize
the phone's audio performance.
Valid values are 0 through299.
This parameter affects settings for
AGC dynamic range and handset
noise reduction thresholds. Always
consult Avaya before changing this
parameter.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 227
Comments on this document? infodev@avaya.com