Avaya J129 - Page 228

Parameter name Default
value
Description
AUDIOPATH 1 Specifies the audio path for the
phone.
Value operation:
• 1: For speaker.
• 2: For headset.
AUDIOSTHD Specifies the level of sidetone in
the headset.
Value operation:
• 0: Normal level for most users
• 1: One level softer than normal
• 2: Two levels softer than normal
• 3: Three levels softer than normal
• 4: Off which means inaudible
• 5: One level louder than normal
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
AUDIOSTHS 0 Specifies the level of sidetone in
the handset.
Value operation:
• 0: Normal level for most users
• 1: Three levels softer than normal
• 2: Inaudible
• 3: One level softer than normal
• 4: Two levels softer than normal
• 5: Four levels softer than normal
• 6: Five levels softer than normal
• 7: Six levels softer than normal
• 8: One level louder than normal
• 9: Two levels louder than normal
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 228
Comments on this document? infodev@avaya.com