Avaya J129 - Page 299

Parameter name Default
value
Description
SEND_DTMF_TYPE 2 Specifies if DTMF tones are sent in-
band as regular audio, or out-of-
band using RFC 2833 procedures.
Value operation:
• 1: In-band
• 2: Out-of-band
SERVER_CERT_RECHECK_HOURS 24 Specifies the number of hours after
which certificate expiration and
OCSP will be used, if OCSP is
enabled, to recheck the revocation
and expiration status of the
certificates that were used to
establish a TLS connection. Valid
values are from 0 to 32767.
Value operation:
• 0: Periodic checking is disabled.
SHORTCUT_ACTION_CONTACT,
SHORTCUT_ACTION_AUTODIAL
0 Specifies the action performed if
the user presses an Autodial key or
selects a contact on the Phone
screen during an active call.
See the full value description in the
Active call shortcut keys
configuration on page 183 section.
SHOW_LAST_EXTENSION 0 Specifies whether to display last
extension after logout.
Value operation:
• 0: To hide last extension after
logout.
• 1: To display the last extension
after logout.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 299
Comments on this document? infodev@avaya.com