Avaya J129 - Page 307

Parameter name Default
value
Description
SNTPSRVR Null Specifies a list of addresses of
SNTP servers.
Addresses can be in dotted-decimal
or DNS name format, separated by
commas without any intervening
spaces.
The list can contain up to 255
characters.
SOFTKEY_CONFIGURATION 0,1,2 Specifies which feature will show
up on which softkey on the Avaya
J129 IP Phonescreens.
The features are defined as follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
SPEAKERSTAT 2 Specifies the operation of the
speakerphone.
Value operation:
• 0: Speakerphone disabled
• 1: One-way speaker (also called
monitor) enabled.
• 2: Full (two-way) speakerphone
enabled.
Note:
This parameter is not
supported on Avaya J129 IP
Phone.
SSH_ALLOWED 2 Specifies if SSH is supported.
Value operation:
• 0: Disabled
• 1: Enabled
• 2: Configured using local admin
procedure. When this mode is
configured, then by default the
SSH server is disabled.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 307
Comments on this document? infodev@avaya.com