Avaya J129 - Page 306

Parameter name Default
value
Description
SMGR_AUTO_FAVORITE 0 Specifies whether all the features
and supported autodials configured
through System Manager are
available on Avaya J169/J179 IP
Phone irrespective of adding it to
favorite or not.
Value operation:
• 0: Do not auto-favorite
• 1: Auto-favorite
SNMPADD Null Specifies a list of source IP
addresses from which SNMP query
messages will be accepted and
processed.
Addresses can be in dotted-decimal
format (IPv4), colon-hex format
(IPv6, if supported), or DNS name
format, separated by commas
without any intervening spaces.
The list can contain up to 255
characters. The default value is
null.
SNMPSTRING Null Specifies a security string that must
be included in SNMP query
messages for the query to be
processed.
Valid values contain 0 through 32
ASCII alphanumeric characters.
The default value is null. Null
disables SNMP.
SNTP_SYNC_INTERVAL 1440
minutes
Specifies the time interval, in
minutes, during which the phone
will attempt to synchronize its time
with configured NTP servers. Valid
values are from 60 to 2880
minutes.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 306
Comments on this document? infodev@avaya.com