Avaya J129 - Page 310

Parameter name Default
value
Description
SYSTEM_LANGUAGE Contains the name of the default
system language file used in the
phone. The filename should be one
of the files listed in the
LANGUAGES parameter.
If no filename is specified, or if the
filename does not match one of the
LANGUAGES values, the phone
uses the built-in English text
strings.
Valid values range from 0 through
32 ASCII characters.
Filename must end in .xml
T
TCP_KEEP_ALIVE_INTERVAL 10 Specifies the number of seconds
that the telephone waits before re-
transmitting a TCP keep-alive (TCP
ACK) message.
Valid values are from 5 through 60.
TCP_KEEP_ALIVE_STATUS 1 Specifies if the phone sends TCP
keep alive messages.
Value operation:
• 0: Keep-alive messages are not
sent.
• 1: Keep-alive messages are sent
(default).
TCP_KEEP_ALIVE_TIME 60 Specifies the number of seconds
that the telephone waits before
sending out a TCP keep-alive (TCP
ACK) message.
Valid values are from 10 through
3600
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 310
Comments on this document? infodev@avaya.com