260-668080-001 Rev 002 March 2013 13
Eclipse Edge User Manual
• Cable ground wire assemblies
• Ground wire cable clamps for tower termination.
•Cable ties.
• Silicon grease.
• Self-amalgamating butyl mastic tape.
• Vinyl tape.
Figure 3-7 shows the contents of the 50 m ODU cable kit.
The correct type of crimp tool must be used to attach the shielded
RJ-45 connector to its ODU cable. The connector body/shield
includes a cable strain relief clamp - the tool must be purpose
designed for this type of connector and clamp, and its heavier
industrial grade cable.
A recommended tool is the Telebox Industries TA5808. It is available
from Aviat as Part No. 008-311001-001.
Figure 3-7. ODUspe 50m Cable Kit
To Next Page
Loading...