Azbil dcp551 mark II User Manual

9-4
Chapter 9. MEMORY CARD OPERATIONS
■ Procedures for saving all programs
This procedure saves all programs on the DCP551 on a memory card. The
program numbers used in the DCP551 are converted to file names on the memory
card.
When the “Overwrite” save function is selected, files on the card that have the
same number as those in the DCP551 are overwritten by the DCP551 files.
When the “Skip” save function is selected, files on the card that have the same
number as those in the DCP551 are left as they are and the next number file is
selected for processing.
■ Procedures for saving setup data
This procedure saves the DCP551 setup data on a memory card.
■ Procedures for saving variable parameters
This procedure saves the DCP551 variable parameter data on a memory card.
Data delete check
Delete Old Data
SAVE ?
Save complete
SAVE key
PARA Data
SAVE Good
DISP key
Normal mode display
(Save operation is not performed.)
DISP key
Normal mode display
(Displayed when there is data on the card.)
Data delete check
Delete Old Data
SAVE ?
Save complete
SAVE key
SETUP Data
SAVE Good
DISP key
Normal mode display
(Save operation is not performed.)
DISP key
Normal mode display
(Displayed when there is data on the card.)
Select save function
Overwrite / Skip
SAVE ?
State of save progress
SAVE key
Save All Prog.
Program 01
Save complete
Save All Prog.
Good
DISP key
Normal mode display
Displays saved program number
(The item indicated by the cursor can be
selected.)
, key

Azbil dcp551 mark II Specifications

General

Brand	Azbil
Model	dcp551 mark II
Category	Controller
Language	English