4 - 2 Recommended Cables
To perform thermocouple input, connect a thermocouple element to the terminals. When the wiring distance is long
or when connecting the thermocouple without the element to the terminals, connect via shielded compensating lead
wires.
NOTE
• For I/O other than thermocouple, use JCS4364 instrument cable or equivalent
(is commonly called twisted shielded cable for instrument use).
The following cable are recommended.
• A shielded multicore microphone cord (MVVS) may be used, if electromagnetic
induction is comparatively low.
To Next Page
Loading...
