Azbil dcp551 mark II - Data Configuration Overview

1 - 3 Data Configuration Overview
Data is comprised of parameters and the program.
Parameters are used to set the functions of the DCP551 while the program is the software that operates the
controller at run time.
● A total of 99 patterns
The program can record up to 99 patterns.
● Parameters
Five types of patterns are provided: variable parameters, event configuration data,
PID parameters, setup data and constant value control data.
1-3
Chapter 1. PRODUCT OUTLINE
Program number = 99 Segment count = 8
SP
Time
Program number = 3 Segment count = 15
Time
Program number = 2 Segment count = 19
SP
Time
Program number = 1 Segment count = 6
SP
Time
(1)
(2)
(3)
(4)
(5)
(6)
(18)
(19)
13)
(14)
(15)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Variable parameter
Event configuration data
PID parameter
Setup data
Constant valule control data