Azbil dcp551 mark II - Procedures for loading event configuration data; Procedures for loading all parameters

9-9
Chapter 9. MEMORY CARD OPERATIONS
■ Procedures for loading event configuration data
This procedure loads event configuration data on the memory card onto the
DCP551.
■ Procedures for loading all parameters
This procedure loads all parameters on the memory card onto the DCP551.
Handling Precautions
The DCP551 Mark II and the old model, DCP551, differ in how some
setup data items are processed and the range of variable parameter PA15.
Thus the following changes have to be made when setup data, variable
parameters or all parameters saved on a DCP551 are loaded onto a
DCP551 Mark II.
• Setup data : C21, C45 to C50, C52, C53, C80, C90 to C97
• Variable parameters : PA15
Setup data and all parameters stored on a DCP551 Mark II cannot be
loaded onto a DCP551. (A loading attempt generates card error 16.)
Data delete check
Delete Old Data
LOAD ?
Load completed
LOAD key
All Parameters
LOAD Good
DISP key
Normal display mode
(Load operation is not performed.)
DISP key
Normal display mode
Data delete check
Delete Old Data
LOAD ?
Load completed
LOAD key
EVENT Data
LOAD Good
DISP key
Normal display mode
(Load operation is not performed.)
DISP key
Normal display mode