Printed
Manual Number
Edition Revised pages Description
date
May 2007 CP-SP-1032E 11th Edition ii SAFETY PRECAUTIONS ■ Example changed.
10-2 ■ Display behavior and alarm code upon input
burnout added.
Dec. 2007 12th Edition 1-2,2-2,2-6,4-18, DCP551B***** model added.
6-8,7-5,7-10,9-1,
11-2,11-5,11-7
July 2008 13th Edition 2-8 ●Thermocouple table changed.
11-5
Specifications
table
"Power consumption" changed
Aug. 2011 14th Edition Inside front cover RESTRICTIONS ON USE deleted, Terms and
Conditions added.
11-1
Chapter 11. DISPOSAL added.
12-1 to 12-8 Old page 11-1 to 11-8
12-6 Standard compliance added.
June 2012 15th Edition Company name changed.
i
Power or current ratings: 25VA
→
40VA was changed.
ii, 3-1, 4-1, 4-8 Warning was changed.
2-8 The thermocouple table was corrected.
4-5 The label was changed.
10-5 A descriotion was added.
12-5 Power consumption was corrected.
12-6 Standard compliance was corrected.
Dec. 2013 16th Edition i Description of built-in fuse was added.
7-27 "C99" and "C100" were changed.
7-33, 7-34 "C99 (PV1 zener barrier adjustment)" and "C100
(PV2 zener barrier adjustment)" were deleted.
12-1 Specifications for "Allowable wiring resistance
(Resistance temperature detector input)" were
changed.
13 "C99" and "C100" were deleted.
Mar. 2014 17th Edition 4-6 The line filter model No. was changed.
Feb. 2016 18th Edition Cover A notice saying “Not for use in Japan” was added.
i Pollution degree, Installation location and Altitude
were added.
i, 12-6 STANDARDS COMPLIANCE was changed.
3-1 A location was added to Mounting position.
3-2, 12-7, 12-8 Dust proof cover were deleted.
To Next Page
Loading...
