6-4
● Display A4
Select Hours and Minutes, Minutes and Seconds or 0.1 Seconds in the time unit
setup data. In the setup data, also select Remaining Segment Time or Total
Running Time.
● Display A5
When the remaining number of cycles is 0, cycle operation stops.
● Display A6
When the programmer function is used in MANUAL mode, the number of digits
available for SP recording flashes. Select Hours and Minutes, Minutes and
Seconds or 0.1 Seconds in the time unit setup data. In the setup data, also select
Remaining Segment Time or Total Running Time.
To Next Page
Loading...
