A-4 Accessories MN1902
A.1.5 Feedback cable part numbers
A description of a Baldor feedback cable catalog number is shown here, using the example
number CBL030SF-ALCE:
Meaning Alternatives
CBL The item is a cable -
030 Indicates the length, in this example 3.0 meters Various lengths are available
SF ThecableisaServo motor Feedback cable -
A Resolver feedback cable
K=Encoder / Hall feedback cable
or EnDat cable
L 12-pin connector (for resolvers and EnDat) P=16-pin connector (for encoders)
CE Metric threaded CE connector* M=Metric threaded connector
*Note: Feedback cables terminated with a CE connector (catalog numbers
CBLxxxxx-xxCE) have shields tied to the connector housing.
If you are not using a Baldor cable with your chosen feedback device, be sure to obtain a
cable that is a shielded twisted pair 0.34mm
2
(22 AWG) wire minimum, with an overall shield.
Ideally , the cable should not exceed 30.5m (100ft) in length. Maximum wire-to-wire or
wire-to-shield capacitance is 50pF per 300mm (1ft) length, to a maximum of 5000pF for 30.5m
(100ft).
To Next Page
Loading...
Need help?
General
