Baldor Flex+DriveII - AC Input Power and Motor Output - 230-460 V Three-Phase Models

7-4 Specifications MN1902
7.1.3 AC input power and motor output - 230-460V three-phase models
230- 460VAC 50/60Hz
(Catalog number FDH4.../FPH4...)
Unit 2.5A 5A 7.5A 15A 20A 27.5A
Nominal input voltage
VAC
230- 460
Minimum input voltage 180
Maximum input voltage 528
Nominal DC-Bus voltage
VDC
325 (230VAC input) / 650 (460VAC input)
Minimum DC-Bus voltage 254
Maximum DC-Bus voltage 746
(Programmable using Mint keyword
DRIVEBUSOVERVOLTS)
Output voltage (line-line)
@VDC-Bus=500V
V
RMS
0 - 353
Nominal phase current (±10%) A
RMS
2.5 5.0 7.5 15 20 27.5
Peak phase current (±10%)
for 1.25s (+0.5s / -0s)
A
RMS
5 10 15 30 40 55
Nominal output power kVA 1.9 3.8 5.7 11.4 15.2 20.9
Efficiency % >95
Output frequency Hz 0 - 500
Nominal switching frequency kHz 8.0
7.1.4 Customer supplied 24VDC supply input
24VDC (Catalog numbers
FDHxxxxx-xxx3 and
FPHxxxxx-xxx3)
Unit 2.5A 5A 7.5A 15A 20A 27.5A
Nominal input voltage
VDC
24
Minimum input voltage 20.4
Maximum input voltage 28.8
Maximum ripple % ±10
Maximum continuous current
@24VDC
A 1.75
Power on surge current
@24VDC, 100ms
A 4