Baldor Flex+DriveII Installation Manual

Input / Output 4-19MN1902
4.6 Option connectors
If there are additional connectors on the front panel of your FlexDrive
II
that have not been
described in previous sections, these are part of a factory fitted option. You will need to refer to
the extra manual supplied with your FlexDrive
II
for details of the option’s connectors.
This completes the input/output wiring.
You should read the following sections in sequence
before attempting to st art the FlexDrive
II
.

Baldor Flex+DriveII Specifications

General

Brand	Baldor
Model	Flex+DriveII
Category	Servo Drives
Language	English