Introduction 2-3MN1902
2.3 Units an d abbreviations
The following units and abbreviations are used in this manual:
V Volt (also VAC and VDC)...............
WWatt..............
A Ampere...............
Ω Ohm...............
µF microfarad..............
pF picofarad..............
mH millihenry.............
Φ phase...............
ms millisecond..............
µs microsecond..............
ns nanosecond..............
Kbaud kilobaud (the same as Kbit/s in most applications)...........
MB megabytes.............
CDROM Compact Disc Read Only Memory.........
CTRL+E on the PC keyboard, press Ctrl then E at the same time..........
mm millimeter.............
m meter...............
in inch...............
ft feet...............
lb- in pound- inch (torque).............
Nm Newton- meter (torque).............
ADC Analog to Digital Converter............
DAC Digital to Analog Converter............
AWG American Wire Gauge............
(NC) Not Connected............
To Next Page
Loading...
