5-10 Operation MN1902
5.3.2 Parameters tool
The Parameters tool can be used to setup many important parameters, such as a scaling
factor for the feedback input, and the action to take when errors occur.
1. Click the Parameters icon in the Toolbox on the left
of the screen.
The main area of the WorkBench v5 window
displays the Controller Parameters screen.
2. The Controller Parameters screen has a
number of tabs listed on the left. Click on a tab
to select it.
If you need help with any of the options, just
press F1 to display the help file.
Remember to click the tab’s Apply button to
send the changes to the FlexDrive
II
.
To Next Page
