Baldor Flex+DriveII Installation Manual

Accessories A-5MN1902
A.1.6 EMC filters
AC filters remove high frequency noise from the AC power supply, protecting the FlexDrive
II
.
These filters also prevent high frequency signals from being transmitted back onto the power
lines and help meet CE requirements. To select the correct filter, see section 3.4.5.
A.1.6.1 Catalog numbers
Baldor
catalog num be r
Rated volts
Rated amps
@ 40°C
Leakage
current (mA)
Weight
kg (lbs)
FI0014A00 250 3 0.4 0.27 (0.6)
FI0015A00 250 6 0.4 0.45 (0.99)
FI0015A01 250 10 0.4 0.73 (1.61)
FI0015A02 250 12 0.4 0.73 (1.61)
FI0018A00 480 7.7 33.04 0.5 (1.1)
FI0018A01 480 32.9 33.04 1.2 (2.65)
FI0019A00 250 3 0.4 0.8 (1.76)
B
M5
A
F
C
E
D
G
Dimensions mm (inches)
Dimension FI0018A00 / FI0019A00 FI0018A01
A 190 (7.48) 270 (10.63)
B 160 (6.30) 240 (9.45)
C 180 (7.09) 255 (10.04)
D 20 (0.79) 30 (1.18)
E 4.5 (0.18) 5.4 (0.21)
F 71 (2.80) 85 (3.35)
G 40 (1.57) 50 (1.97)
Figure 40 - Filter dimensions, types FI0018A00, FI0018A01 and FI0019A00

Baldor Flex+DriveII Specifications

General

Brand	Baldor
Model	Flex+DriveII
Category	Servo Drives
Language	English