Barco F50 - Page 107

11. Multichannel installations
Setting
Value Description
Comment
Drifting, free running
Free running Display and source signals
are not synchronized.
[3D sour ce] phase
Slider bar
Time taken to complete a
single input phase.
@60hz, 1 phase is equal to 10
second s.
[3D] display s ync
Source / S yn c 1 / S yn c 2 /
Sync 3
Source sy nc inform ation.
[3D display] frequency
XX Hz
Current frequency (Hz)
Unstable
Frequency of display and
source signals is not
synchronized.
Lack of synchronization
between display and sour ce
signal frequency may prevent
projector processing and
displaying image pr operly, or
at all.
[3D display] status Free running Display and source s ignals
are not synchronized.
Asynchronous display and
source signal may prevent
projector processing and
displaying image pr operly, or
at all.
Locked Display and source s ignals are
synchronized.
Drifting, locked Display and source s ignals are
synchronized but dr ifting.
May cause interference to
signal and produce artefacts
in image.
[3D display] phase
Slider bar
Time taken to complete a
single input phase.
@60hz, 1 phase is equal to 10
second s.
601–0307–00 F50 25/02/2016 103