10. Color calibration
10.3 Define the x,y coordinates for RGB(W)
About
Main m enu – R ealColor – RealColor
This feature provides total control of the way colors behave along both axes, and enables users to adjust the display white point,
with a three decimal accuracy. This is particularly useful when color matching several projectors.
Color Correction must be enabled before any changes can be made to color coordinates. Do this at Main
menu – Picture – RealColor – R ealColor – ColorCo rrection
Coordinates (x,y, white point) c an be set to eclipse any color in the available optical gamut for any one projector. The default setting
is D65, x=0.3127, and y=0.329.
All changes applied to the c olor display oc cur d ynam ically.
Color settings can be reset to D65
6
at any time by selecting, Main Menu — P icture — RealColor — Reset to D65
6. CIE Standard Illuminant D65
601–0307–00 F50 25/02/2016 91
To Next Page
Loading...
