8. Set up the picture
8.4 Apply a display profile
About
Main M enu — Picture — Profile
The projector has a selection of 6 predefined display profiles that can be used to optimize the display for different uses. E ach of the
display profiles c an be modified by the user. An asterisk (*) beside the profile nam e indicates that the original settings have been
changed. In addition, there is a custom profile where users can create and save their preferred settings.
Picture settings that can be m odified in a profile are:
• BrilliantColor mode
• G amm a curve
• Color correction (white point)
• Lamp pow er
Changes to the current profile c an be discarded by s electing, M ain Menu — Picture — Profile R eset and then selecting current
profile and ok.
To r eset all the d isplay pro files to the factory settings, go to Main Menu — Picture — Profile R e s e t and select all profiles and
ok when prompted.
The table below shows the factory settings for each of the 6 predefined display profiles.
Profile Description BrilliantColor Gamma Color
Correction
Lamp Power
Standard Color Dynamic Off 350
Presentation Bright Dynamic Off 350
Bright Bright Computer 2 Off 350
Cinema Off Film 2.2 On 350
DICOM Digital Imaging and Comm unications
in Medicine (DICO M) compliant.
Off DICOM 180
LUX
On 350
SRP™ Smear Reduc tion Processing. Not
available with High Brightness color
wheel.
SRP Half Film 2.2 Off 350
601–0307–00 F50 25/02/2016 75
To Next Page
