7. Change projector settings
7.3 Customize the On Screen Display (OSD)
Change the display language
Main M enu — Language
The default language fo r the projector menu system is English. To selec t a new display language, go to the Language submenu
and scroll down the list until you reac h the desired language. Click OK to activate the h ighlighted language. The menu language
will change immediately.
There are currently 11 m enu disp lay languages available:
• Chinese Simplified
• Chinese Traditional
•English
• F rench
•German
• Italian
• Japan ese
• Kor ean
• N orwegian
• Por tuguese
• R ussian
• Spa nish
• Swedish
Define OSD behavior
Main Menu — Installation — O S D E nable
On Screen Display (OSD ) messages are used to prompt and confi rm p rojector m enu actions and functi
ons. Th ere are three modes
of O SD behavior:
Mode Description
On All messages, warnings and information is displayed.
Off No messages ar e s hown.
Only w arnings Only critical warning messages, for example temper ature overheating, are d isplayed.
Change OSD time-out value
Main Menu — Settings — Menu Timeout
The OS D men u will automatically close after it has been inactive for a given period of time.
The default time-out period is 30 seconds. This value c an be regulated from 5 to 60 seconds. Selecting Never will disable the
time-out function.
Set background color
Main Me nu — Settings — Background
A solid, colored back ground is displayed whenever the projector is se arching for a source. Use this menu to change the background
between black, white an d gray.
Change the splash screen
Main M enu — Settings — Splash
By default, the manufacturer ’s logo will appear during projector startup. Th is can be changed to a s olid colored screen, if desired.
66
601–0307–00 F50 25/02/2016
To Next Page
