5. Installation
Motorized lens s hift
TheF50 lens shift function is fully motorized and ca n b e controlled via the projector keypad , wireless remote control, or wired control
interface e.g. RS232.
To ac tivate lens shift, press the OK button on the keypad, or the Shift button on the remote control. Use the corresponding arrows
to move the lens up, down, right and left. For more detail on this proc edure, see "Lens shift", page 26.
For information on using the RS-232 or LAN con trol interfaces, please refer to the relevant A SCII Commands Protocol available for
download at www.barco.com
601–0307–00 F50 25/02/2016
41
To Next Page
Loading...
