7. Advanced
3. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the value of the Sharpness.
Note: The Sharpness can be set from –8 to +8.
4. Press BACK to return to the Geom etry E dit menu.
7.6.6.9 Geometry Reset
Overview
• Reset all levels
• Restore to a level
7.6.6.9.1 Reset all levels
How to reset all levels?
1. Start the Geometry Edit menu
2. Push ↓ or ↑ to select Reset
3. Push the → key to pull down the menu.
4. Push ↓ or ↑ to highlight Reset all levels....
Image 7-93
All the levels are reset. If these levels contained geometry corrections, this will be noticed in the image by a jump.
5. Press BACK to return to the Geom etry E dit menu.
7.6.6.9.2 Restore to a level
What can be done ?
Restore to a level means that all the higher level geometry corrections are reset (all geometry correction values are set to 0). The
correction values of the level and all the lower levels are kept.
104
R59770286 NW-12 07/09/2009
To Next Page
Loading...
