Barco NW-12 - Accessing the Geometry Menu; Geometry Distortions

7. Advanced
Standard file directory, also the type of file : Custom or Standard
Dist_file1 file name
xml
file extension
Available Geometry operations
• Load : loads an existing standard or custom geometry file
• Edit : allows to edit a custom geometry file
• Rename : allows to rename the geometry file
• Copy : allows to copy the geometry file
• Delete : allows to delete the geometry file
7.6.3 Accessing the Geometry menu
How to access the Geometry menu ?
1. Press MENU to activate the Tool bar
2. Press → to select Geometry
3. Press ↓ to Pull down the Geometry menu
Image 7-58
7.6.4 Geometry distortions
What can be done ?
The available geometry corrections are the 2x2 mode correc
tions i.e. :
• Keystone
• Linearity
The option program (see Option key in the Service menu) allows, however, to upgrade the geometry features to up to the 33x33
mode i.e. a geometry adjustment consisting of the entire im
age divided in 33x33 regions that can be shifted to the desired location.
84
R59770286 NW-12 07/09/2009