Barco NW-12 - Connecting a DVI Signal

4. Installation
DVI
DVI
COMPUTER
COMPUTER
RS 232 C
RS 232 C
DVI
DVI
R.C.
R.C.
DVI
DVI
COMPUTER
COMPUTER
RS 232 C
RS 232 C
DVI
DVI
R.C.
R.C.
R / PR
R / PR
G / Y
G / Y
B / PB
B / PB
Hs / Cs
Hs / Cs
Vs
Vs
VIDEO
VIDEO
S-VIDEO
S-VIDEO
R / PR
R / PR
G / Y
G / Y
B / PB
B / PB
Hs / Cs
Hs / Cs
Vs
Vs
VIDEO
VIDEO
S-VIDEO
S-VIDEO
DESKTOP INPUT
DESKTOP INPUT
Image 4-17
Connecting a YUV signal
4.5.5 Connecting a DVI signal
Both DVI and HDCP DVI are supported and can be connected to the DVI connector of this projector.
In case a HDCP DVI signal is connected to the DVI input, the DVI output image will not show the image of this
source. A gray window will be displayed instead.
How to connect a DVI signal ?
1. Connect the DVI cable to the projector’s DVI input
26
R59770286 NW-12 07/09/2009