7. Advanced
Image 7-117
5. Press ENTER
A dialog box is displayed
Image 7-118
6. Use ↑ or ↓ to select the radio button Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑ or ↓ to browse to the input field
8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown time
9. Press MENU or BACK to exit or to go back to the previous menu
7.8.5 Desktop
What can be done ?
An external source can be connected to the projector in order to be used as desktop i.e. as background for the connected sources.
The desktop source which is in general a PC can then be used to manage
the projector sources which act as source windows on
top of the desktop image. An Ethernet link between the desktop PC and the projector allows the control of the source windows.
How to enable the desktop ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select D eskt o p
5. Press → to open the menu
6. Use ↑ or ↓ to select ON
Image 7-119
7. Press ENTER
The desktop is displayed if the desktop PC is connected (see connections)
Using Desktop makes only sense when using the Barco Desktop integration software. The Desktop integra-
tion software is covered in the Desktop integration User Guide.
R59770286 NW-12 07/09/2009 117
To Next Page
Loading...
