Barco NW-12 - Slider Box Position; Dynacolor

7. Advanced
Image 7-124
5. Press ENTER
6. Use ↑ or ↓ to position the status bar
7.9.5 Slider box position
What can be done ?
The slider box function allows to display or hide the different boxes
used for instance for picture settings (contrast, ...).
How to reposition the slider box?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Slider box p osition
Image 7-125
5. Press ENTER
A slider box is displayed. Use the 4 arrow keys to drag the box to the desired position.
Thereisacoarseandafine adjustment of the position, use ENTER (when slider box is displayed) to switch
between the two.
7.9.6 Dynacolor
Overview
• Introduction
• Dynacolor adjustment
• Black Color Matching
R59770286 NW-12 07/09/2009
121