4. Installation
Image 4-26
5. Push the cursor key ↑ or ↓ to highlight the desired parameter.
6. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values.
7. Press Apply settings to apply the changes
A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting ne twork
takes a few seconds more.
Image 4-27
4.5.10.3 RS232 communication
What is possible with the RS232 connection ?
1. Remote control :
2. Data communications: sending data to the projector or copying the data from the projector to a memory device (hard disc,
floppy, etc.).
How to connect the RS232 ports?
1. Connect the D9 connector from the RS232 cable to the RS Input on the projector.
R59770286 NW-12 07/09/2009
33
To Next Page
Loading...
