Barco NW-12 User Manual

7. Advanced
Image 7-192
How to adjust the convergence?
1. In the box Adjustment guide go to the radio button On and hit Enter
This will switch on the internal pattern.
2. In the box Horizontal use the slider bars or enter a value (0 .. 3) in the data box of the color you want to shift horizontally.
3. In the box Vertical use the slider bars or enter a value (0 .. 3) in the data box of the color you want to shift horizontally.
7.11 Service
Overview
• Diagnostics
• Option key
• Calibration of CLO sensor
• Operation options
7.11.1 Diagnostics
Diagnostics
See theTroubleshooting section
7.11.2 Option key
CAUTION: This menu is only intended for authorized personnel! Only to be used to activate your option key
purchased at Barco!
How to activate a new purchased option ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Option key...
158
R59770286 NW-12 07/09/2009

Barco NW-12 Specifications

General

Brand	Barco
Model	NW-12
Category	Projector
Language	English