Barco NW-12 - Connecting an RGB Signal

4. Installation
DESKTOP INPUT
DESKTOP INPUT
DVI
DVI
COMPUTER
COMPUTER
RS 232 C
RS 232 C
DVI
DVI
R.C.
R.C.
DESKTOP INPUT
DVI COMPUTER
RS 232 C
DVI R.C.
LAYER2
LAYER3
LAYER4
LAYER5
LAYER1
R / PR
R / PR
G / Y
G / Y
B / PB
B / PB
Hs / Cs
Hs / Cs
Vs
Vs
VIDEO
VIDEO
S-VIDEO
S-VIDEO
R / PR
G / Y
B / PB
Hs / Cs
Vs
VIDEO S-VIDEO
Image 4-15
Input/Output layers
Layer 3,4,5 are fixed i.e. they may only be fitted with the boards mentioned above.
An optional board (SDI/HDSDI or DVI) is to be installed on the first or second (by default empty) layer
The system section
The bottom system section holds :
• Ethernet RJ45 connection
• DVI desktop input
•LCDdisplay
4.5.3 Connecting an RGB signal
How to connect an RGB signal ?
1. Connect the BNC connectors to the projector’s RGB input
24
R59770286 NW-12 07/09/2009