7. Advanced
Image 7-7
4. Press ENTER to confirm your choice
A bullet indicates the selected composite video source which now appears on the screen.
7.4 Image
Overview
• Image settings
• Gain control on Video
• Aspect ratio
• Color temperature
• Input balance (RGB signals only)
7.4.1 Image settings
7.4.1.1 Setting the Contrast
Contrast adjustments
Adjust the contrast to “brighten” the white parts of the image.
It is recommended to adjust the brightness before adjusting the contrast.
How to change the Contrast
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Contrast
7. Press ENTER
On the screen appears now a slider box
Image 7-8
8. Use ←or → , the numeric keys on the remote, or the keypad to change the contrast
60
R59770286 NW-12 07/09/2009
To Next Page
Loading...
