Barco NW-12 - Black Color Adjustment for Set 1

7. Advanced
The procedure has to be done for all the channels (projectors)
7.9.6.3.2 Black Color adjustment for Set 1
How to adjust black color for Set 1 ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select B lack Color matching
7. Press → to open the menu
8. Use ↑ or ↓ to select for example Set1
Image 7-136
9. Press ENTER
R59770286 NW-12 07/09/2009
131