7. Advanced
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Tint
7. Press ENTER
On the screen appears now a slider box
Image 7-11
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Tint
7.4.1.5 Sharpness (Video signals only)
How to adjust the Sharpness
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Sharpness
7. Press ENTER
On the screen appears now a slider box
Image 7-12
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Sharpness
7.4.1.6 Gamma
Gamma adjustment
The gamma parameter determines the way your encoded (luminance) signal is transformed into brightness at the output of the pro-
jector. A correct gamma setting will allow the use of a maximum of gradations (brightness levels) in the projected image. Changing
the gamma mainly changes the midtones of the image.
How to adjust the Gamma
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Gamma
7. Press ENTER
62
R59770286 NW-12 07/09/2009
To Next Page
Loading...
