7. Advanced
Image 7-186
Scaled patterns : Stereo pattern
How to select an internal pattern ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation menu
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Internal Patterns
Image 7-187
5. Press → to Pull down the menu
6. Use ↑ or ↓ to select the desired pattern
7. Press ENTER
The active selection is shown with a white bullet
R59770286 NW-12 07/09/2009
155
To Next Page
Loading...
