7. Advanced
Image 7-65
Note that the dialog box is transparent so as to allow the preview of the adjustment over the whole screen
during the adjustment (the image to be adjusted is not hidden by the dialog box)
Description of the Edit dialog box
An intuitive user interface is used to perform all the geometry corrections. This gives the user real-time access to the distortion
characteristics. Each individual point can be selected and shifted to the desired location in real time.
Depending on the geometry mode, the dialog box may slightly differ, the dialog box below is for a 2x2 mode adjustment.
Image 7-66
Field
/adjustment
Description Notes
Level 2x2 gives the selected geometry adjustment. In this case, a
2x2 adjustment
90 R59770286 NW-12 07/09/2009
To Next Page
Loading...
