baxter ExactaMix 2400 Compounder - Changing the Tube Set; Checking the Tube Set Statistics

Setting Up the Compounder
Operator Manual for the Baxter ExactaMix 2400 Compounder
Page 42 53007410 Rev. C
CHANGING THE TUBE SET
The tube set must be changed:
• When you select a different configuration, in some cases
• During the daily setup, if the tube set is expired
NOTE: To set up the options for tube set expiration, refer to Tube Set Expiration on
Page 115.
WARNING
To maintain delivery accuracy, the tube set must be replaced after it has delivered
150 L of fluid or been installed for 24 hours, whichever comes first.
Check that the materials of the inlets, valves and bags are compatible with all
ingredients used. Contact the ingredient manufacturer to confirm compatibility.
Checking the Tube Set Statistics
1. At the Setup Wizard screen, tap Change Tube Set.
Setup Wizard screen, changing the tube set
NOTE: To change the tube set without using the Setup Wizard, you can tap Compound >
Change Tube Set at the menu screen.