baxter ExactaMix 2400 Compounder - Attaching the New Ingredients and Inlets

Setting Up the Compounder
Operator Manual for the Baxter ExactaMix 2400 Compounder
Page 48 53007410 Rev. C
Attaching the New Ingredients and Inlets
Always use aseptic technique when attaching the ingredients and inlets.
Follow all the steps of this process for one ingredient and inlet pair before continuing with the
next pair. This practice helps to ensure that you attach the ingredients and inlets correctly.
Tip! To keep track of the steps, Baxter recommends working from left to right in the sequence
of the port numbers (1, 2, 3 and so on). You might find it helpful to remember the main steps of
this process (covered in more detail on the upcoming pages) by remembering the term iTASL,
which signifies:
1. identify the port you are going to be working with by turning the cap.
2. Touch (tap) the ingredient button on the screen.
3. Attach the inlet to the port on the valve set.
4. Spike and hang the source container.
5. Label the inlet with the numbered barcode label.
To attach an ingredient:
1. identify the port you are going to be working with by turning the cap.
Turning Cap
2. Touch (tap) its ingredient button on the screen.