baxter ExactaMix 2400 Compounder - Attaching the Patient Bag

Using the Compounder
Operator Manual for the Baxter ExactaMix 2400 Compounder
53007410 Rev. C Page 85
Attaching the Patient Bag
Always use aseptic technique when attaching the bag.
1. Connect a sterile patient bag to the outlet tube.
Tip! Baxter recommends connecting the bag to the outlet tube before attaching it to the
load cell, to prevent twisting or straining the tube.
2. Attach the bag to the load cell. Place the holes in the corners of the bag over the guide
pins on the load cell.
3. Route the bag’s fill port through the load cell’s fill port holder.
4. Make sure the outlet tube is curved, not twisted or kinked.
Attaching the patient bag to the outlet tube and the load cell