baxter ExactaMix 2400 Compounder - Page 68

Setting Up the Compounder
Operator Manual for the Baxter ExactaMix 2400 Compounder
Page 60 53007410 Rev. C
WARNING
Scan only the barcodes attached to the inlet and the corresponding source container.
Do not scan unattached barcodes or old (used) containers. Doing so may result in
incorrect ingredient delivery, resulting in patient harm.
Tip! Baxter strongly recommends scanning from left to right (or from right to left) to prevent
skipping any ports.
1. Scan the barcode label on an inlet.
2. Scan the barcode label on the corresponding source container.
If you scanned the correct source container, the corresponding ingredient button
appears on the screen.
BARCODE VERIFICATION screen, one pair of barcodes verified
If you scanned an incorrect source container, the compounder beeps and displays
Incorrect scan, try again at the bottom of the screen. Scan the correct source container.