© BEKA 201 !9 All rights reserved
BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
15
7. Start up
7.1 Lubricants
Thedevice isdesigned forstandard multi-purposegreases upto NLGIcl.2.
· Uselubricants withhigh-pressure additives.
· Onlyuse lubricantsof thesame soapingcriteria.
· Donot useany lubricantswith solidscontent (lubricantswith solidscontenton request,e.g. graphiteor MoS2)
7.2 Fillingwith lubricant
· Fillthe lubricantreservoir withclean lubricantat thefilling nippleora fillingconnection!
· Observe the machine manufacturer's lubricant details! Only use lubricants according to machine manufacturer's
specifications!
· Collectleaking lubricantin asuitable reservoirand disposeit professionally!
· Observethe safetydata sheetof thelubricant manufacturer!
· Thelubricant viscositychanges withthe operatingtemperature.
· Checkthe levelseveral timesin equalintervals duringthe firsthoursof operationand refilllubricant, ifnecessary.
· Payattention toutmost cleannesswhen refillingthe reservoir!
By default, you receive the device with a basic filling. The procedure for filling devices with basic
fillingcan befound inchapter 7.2.2„Filling ofthe device“.
If thedevice has nobasic filling,observe the procedurefor the initialfilling for devices with follow-up
piston which is described in chapter 7.2.1 „Initial filling of devices with follow-up piston“. You can
proceed as described in chapter 7.2.2 „Filling of the device“ for the initial filling of devices with
agitatorblade.
Caution!
To Next Page
Loading...
Need help?
General
