To Next Page

To Previous Page

BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410

...a product of

2.3 Hazardsin caseof non-observanceof thesafety instructions

Results of of the can be , forthe environmentandnon-observance safety instructions hazards topersons

the device. Non-observance of the safety instructions may result in the loss of any liability claims. The non-

observancecould morespecifically resultin thefollowing hazards(for example):

· Failureof importantdevice functions.

· Failureof prescribedmethods regardingmaintenance andrepair.

· Dangerto personsby electrical,mechanical andchemical effects.

· Dangerto theenvironment byleakage ofhazardous substances.

2.4 Obligationsof theoperator /user

· If movable, rotating, hot or cold parts of the device bear risks, the customer must protect these parts

againstcontact. Thisprotectionmust notbe removed.

· Any leakages of hazardous substances must be drained in a way that no risks for persons or the

environmentarise. Pleasealso referto thedata orsafety datasheetsof therespective manufacturers.

· Observeall legalprovisions.

· Hazardsdue toelectricity areto beexcluded.

· Examination of pipes and hoses regarding safe provision, use, proper assembly and function has to be

carriedout accordingto regionallyapplicable directives.Inspection intervalsmay notbe exceeded.

· Defectivepipes orhoses mustbe replacedimmediately andprofessionally.

· Hydraulic hoses and polyamide pipes are subject to natural aging and have to be exchanged in regular

intervalsaccording tothe manufacturer'sspecifications.

· Asafetydata sheetof thecurrently usedlubricant mustbeprovided atthe device.

· Observethe universallyvalid Ordinanceon HazardousSubstances inits latestversion.

2.5 Safetyinstructions formaintenance, inspectionand assembly

All and may only be carried out by who ismaintenance, inspection assembly work qualified personnel

sufficientlyinformed bythoroughreading ofthe userinformation.

Any work complete standstill pressurelessat the device may generally only be carried out at and in as

well as . Furthermore, appropriate (gogglesdisconnected condition personal protective equipment

among others) is necessary. The shutdown procedure of the device as described in the manual must be

strictlyfollowed.

Secure the device against intentional or unintentional recommissioning during maintenance or repair. All

safety and protection arrangements have to be put back in place again immediately after completion of the

work.

Environmentally hazardous media must be disposed of professionally and according to the relevant legal

provisions. and have to be cleaned before maintenance. Please wearPolluted contaminated surfaces

protective equipment to that purpose. See the lubricant manufacturers' safety data sheets hereto,

respectivelythe datasheets providedby themanufacturers ofauxiliaries andworkingmaterials.

BEKA BEKA-MAX PICO-troniX1 User Manual

Questions and Answers: